|
|
|||||
| Home | Products | Forum | Gallery | Contact | Manual |
|
|
|||||
 |
Richard's
26" Standard kit with balsa elevons. Motor is a GoBrushless GBv with 15t, 26awg configured in Wye with 12 magnet poles Flies fantastically on an Etec 1200mah LiPoly battery |
||||
 |
Tony's
26" Standard kit. Was converted to GBv custom motor but this was always a bit on the hungry side. |
||||
 |
Mick Coopers 26" Slope Soarer | ||||
 |
The Nottingham Wingbat Squadron. Bin those Zagis! | ||||
 |
Micks
30" set against a 26" This was actually the prototype 30". In the picture is has an EPS50 but this was powered by every conceivable motor combo you can think of. |
||||
 |
Another slope soarer. This I belive was also later converted to powered flight | ||||
 |
26"
by Ray Ambler
Presently using Tornado 6-3d on 8 x 3.8 APC-e. Not much go but current is below 10A so ESC is happy.(11.1v li-poly fully recessed into wing). All up weight is 363grams (bit heavy)
|
||||
 |
Michael Goode's nice look 26" (or is it a 30"?) Fitted with a trusty EPS50 | ||||
 |
Jay's 26 incher - Seen this colour scheme somewhere else haven't I ? | ||||
